GMP Certification Process: Steps to Get Certified 2026-TRANWIN CONSULTING
Hotline

GRS认证

Current LocationHome> COC Factory Audit>GMP Factory Audit>GMP Certification Process: Steps to Get Certified 2026

GMP Certification Process: Steps to Get Certified 2026

Source: 2026-11-19 07:08 by TRANWIN CONSULTING GMP Certification Process: Steps to Get Certified 2026 Read: 9

GMP compliance is achieved through a structured pathway of gap analysis, system implementation, internal verification, and external inspection. While GMP is a regulatory requirement rather than a single global certificate, the practical steps to get certified are consistent across pharmaceuticals, food, cosmetics, and medical devices. The exact authority and process depend on your product and market.

How to Get GMP Certified: Step-by-Step

Step 1: Identify the Applicable GMP Framework

Determine which GMP regulation applies to your product and market. Common frameworks include U.S. FDA CGMP (21 CFR Part 211 for drugs, Part 117 for food), EU GMP (EudraLex Volume 4), ICH Q7 for APIs, ISO 22716 for cosmetics, and PIC/S-aligned inspections.

Step 2: Conduct a Gap Analysis

Compare your current operations against the applicable GMP requirements. Document gaps in premises, equipment, documentation, training, and process controls, then prioritize corrective actions.

Step 3: Build Documentation and QMS

Establish the core quality documents: quality manual, standard operating procedures (SOPs), specifications, batch records, and deviation and change-control systems. Documentation is the backbone of GMP.

Step 4: Train Personnel

Train all staff on GMP principles and their specific duties. Maintain training records and qualify personnel for critical operations. Competence is a recurring inspection focus.

Step 5: Implement Process Controls and Validation

Validate critical equipment, cleaning methods, and manufacturing processes. Put in place environmental monitoring, in-process controls, and material traceability so quality is built into production.

Step 6: Perform Internal Audits

Run internal audits and self-inspections to verify readiness. Address findings through corrective and preventive actions (CAPA) before the external assessment.

Step 7: Undergo External Inspection or Audit

Engage a recognized certification body or receive inspection from the relevant authority (e.g., FDA, EMA, or a PIC/S participating authority). The on-site assessment reviews facilities, records, and practices against the standard.

Step 8: Close Findings and Maintain Compliance

Respond to any inspection observations with CAPA. Once requirements are met, you receive licensing or certification. Maintain compliance through surveillance audits, periodic reviews, and continuous improvement.

FAQ: GMP Certification Process

The following questions address common points about the GMP certification pathway.

Q: Is GMP a single certificate?

A: No. GMP is a set of regulatory requirements demonstrated through licensing and inspections rather than one global certificate. Sector standards such as ISO 22716 for cosmetics may also be certified by third-party bodies.

Q: Who performs the GMP audit?

A: GMP compliance is verified by regulatory authorities (such as the U.S. FDA or EU agencies coordinated through PIC/S) and, for voluntary standards, by accredited certification bodies like SGS, Intertek, TÜV, or Bureau Veritas.

Q: How long does the GMP process take?

A: Timelines vary by facility size, product complexity, and readiness. Implementation typically takes several months, after which inspection and approval follow. Specific duration depends on your starting point and the chosen framework.

Q: Can I start GMP implementation before choosing a certification body?

A: Yes. Building your quality system, documentation, and training can begin immediately. Selecting the certification body or notifying the authority is usually done once your system is substantially in place.

Q: What happens after GMP approval?

A: You must maintain compliance through routine internal audits, surveillance inspections, and updated documentation. Significant changes to facilities or processes typically trigger re-assessment.

Conclusion

The GMP certification process rewards preparation. Facilities that invest early in documentation, training, and process validation move through inspection faster and with fewer findings. Treat GMP as a continuous system, not a one-time event.

Need a tailored GMP implementation roadmap? Contact our GMP consultants to get started.

References

  1. U.S. FDA. Current Good Manufacturing Practice (CGMP) Regulations. Retrieved from https://www.fda.gov/
  2. European Commission. EudraLex Volume 4 — Good Manufacturing Practice. Retrieved from https://health.ec.europa.eu/
  3. PIC/S. Pharmaceutical Inspection Co-operation Scheme. Retrieved from https://www.picscheme.org/
  4. ISO 22716:2007. Cosmetics — Good Manufacturing Practices (GMP) — Guidelines.

Tag
Contact Us

TRANWIN MANAGEMENT CONSULTING CO.,LTD.


CONTACT: Mr. David Lee

E-MAIL: chaowang@tranwin.net(prefered)

MOBILE:18601633226

TEL: 0086-21-51029391 

WECHAT: LISHUNDAO

ADD: No. 655 Yinxiang Road, Nanxiang Town, Jiading District, Shanghai


ASIAN OFFICES

Hanoi Office, Vietnam

Ho Chi Minh Office, Vietnam

Cambodia Office

Thailand Office

Malaysia Office

The Leading Factory Audit Consulting Company from China to Asia