What are the regulations for chemical leaks and machine protection devices at Wal-Mart SCS Audit?-The Leading Factory Audit & Inspection Consulting Company from China to Asia | TRANWIN
Hotline

GRS认证

Current LocationHome> COC Factory Audit>WalMart Factory Audit>What are the regulations for chemical leaks and machine protection devices at Wal-Mart SCS Audit?

What are the regulations for chemical leaks and machine protection devices at Wal-Mart SCS Audit?

Source: TRANWIN 2019-06-15 17:20 by admin What are the regulations for chemical leaks and machine protection devices at Wal-Mart SCS Audit? Read: 114

There are many regulations in the Wal-Mart SCS audit. Today we only talk about the two regulations for chemical leaks and machine protection devices.


Wal-Mart SCS inspection of chemical spills:


1. The responsible persons and workers at all levels of the production department and production line should master the correct use of the eye wash device and be familiar with the installation position of the eye wash device.

2. Eyewashers should be installed in areas where chemicals are used (eg silk screen shops, chemical warehouses).

3. Develop procedures for dealing with chemical spills and identify how to deal with accidents.

4. The two faucets of the eye wash should be discharged normally. The water source of the eye wash should be in accordance with the sanitary conditions.

5. Eyewasher installation location should be within 30m of the chemical warehouse or chemical use point or 15s when needed.

6. When the worker's face, eyes, arms or neck are exposed to chemicals, they should be rinsed with an eye wash.


Wal-Mart SCS Audit Machine Protection Device Regulations:


1. The factory shall conduct pre-job training for machinery and equipment operators, and shall have a job training record and a signature of the training personnel.

2. The rotating parts of the machine should have personnel close to the self-stop protection device and protective cover.

3. The protective platform should be added to the walking platform and lifting platform of the machinery and equipment, and the height of the protective fence should not be less than 1 meter.

4. The protection device of the machine should be in an effective protection state.

5. The operation instructions should be posted on the machine and equipment. The above operating methods and precautions should be detailed.

6. For jobs with occupational injury factors, the factory should be equipped with protective glasses, masks, masks, earplugs, safety helmets and other labor insurance products.

Latest Articles
Contact Us

SHANGHAI TRANWIN MANAGEMENT CONSULTING CO.,LTD.


CONTACT: Mr. David Lee

E-MAIL: chaowang@tranwin.net(prefered)

MOBILE:18601633226

TEL: 0086-21-51029391 

WECHAT: LISHUNDAO

ADD: No. 655 Yinxiang Road, Nanxiang Town, Jiading District, Shanghai

Cases
The Leading Factory Audit Consulting Company from China to Asia
Copyright: SHANGHAI TRANWIN MANAGEMENT CONSULTING CO.,LTD. ADDRESS: No. 655 Yinxiang Road, Nanxiang Town, Jiading District, Shanghai TEL: 021-51029391 400-680-0016 E-mail: chaowang@tranwin.org