ISCC (International Sustainability and Carbon Certification) is one of the world's leading certification systems for sustainable, deforestation-free and traceable supply chains. It covers agricultural, forestry, waste and residue raw materials, non-bio renewables and recycled carbon materials and fuels across the food, feed, chemical, packaging and energy markets. This guide explains how ISCC works, what the requirements are, and how to get certified in 2026.
Key fact for 2026: Since 1 July 2025, ISCC PLUS has operated with its own standalone System Documents (v1.1), independent of ISCC EU. These were published on 13 November 2025 and become mandatory on 1 January 2027. The previous harmonized ISCC PLUS documents remain valid through 31 December 2026, and combined ISCC EU + ISCC PLUS audits are still possible during the transition.
What Is ISCC Certification?
ISCC is a certification system that offers solutions for the implementation and certification of sustainable, deforestation-free and traceable supply chains. Independent third-party certification ensures compliance with high ecological and social sustainability requirements, greenhouse gas emissions savings (on a voluntary basis under ISCC PLUS), and traceability throughout the supply chain. ISCC can be applied globally in all markets, including food, feed, chemical and energy.
ISCC has developed since 2006 through an open multi-stakeholder process involving representatives from agriculture, processing and refining industries, trade, and environmental and social NGOs. The interests of the different stakeholders are represented in the ISCC Association (ISCC e.V.). ISCC operates two main certification systems:
- ISCC EU – a certification system to demonstrate compliance with the legal sustainability requirements of the EU Renewable Energy Directive (RED II). It applies primarily to biofuel markets in the EU.
- ISCC PLUS – a voluntary certification system for all markets and sectors not regulated by RED II, such as food, feed, energy and diverse industrial applications (including chemicals, plastics and packaging). Under ISCC PLUS, all types of agricultural and forestry raw materials, waste and residues, non-bio renewables and recycled carbon materials and fuels are covered.
ISCC offers a "One-Stop-Shop" solution because the ISCC EU and ISCC PLUS schemes are widely harmonized. With a single audit, an operation can obtain both an ISCC PLUS and an ISCC EU certification. The main criteria of the ISCC sustainability scheme are based on the RED II sustainability requirements, with additional sustainability requirements on environmental and social issues that go beyond legal requirements.
The Six ISCC Sustainability Principles
The sustainability requirements for farms and plantations are built on six sustainability principles. Within ISCC, these apply equally for ISCC EU and ISCC PLUS:
- Protection of land with high biodiversity value or high carbon stock.
- Environmentally responsible production to protect soil, water and air.
- Safe working conditions.
- Compliance with human, labour and land rights.
- Compliance with laws and international treaties.
- Good management practices and continuous improvement.
ISCC does not accept any form of compensation or remuneration for breaches of system requirements. Social criteria also apply where waste material is collected by individuals in public places (for example, near riversides or ocean-bound plastic), in which case ISCC Principle 4 must be verified in addition to the framework audit.
Eligible Materials & Raw Material Categories
Under ISCC PLUS, all types of agricultural and forestry raw materials, bio wastes/residues and fossil materials contributing to the circular economy and bioeconomy can be certified. The standard defines three raw material categories at the beginning of the supply chain:
| Raw Material Category | Description | Examples |
|---|---|---|
| Bio feedstocks | Derived from virgin biomass (the biodegradable fraction of products from agriculture, forestry and related industries). | Corn, sugarcane, rapeseed |
| Circular feedstocks | Waste/processing residues reused or recycled in a loop without landfilling or energetic use. "Bio-circular" (biological origin) or "circular"/technical-circular (non-biological, fossil-based). | UCO, tall oil, food waste, mixed plastic waste, end-of-life tires |
| Renewable feedstocks | Non-biological materials derived from processes using renewable energy sources other than biomass (e.g. renewable electricity). | Wind, solar, geothermal, hydro electricity |
For waste and residues, the material must be proven to have reached the end of its intended life cycle (per the Waste Framework Directive 2008/98/EC). Pre-consumer material (e.g. manufacturing scrap) can be claimed as "circular" only if an additional processing step is applied by an official waste management company or external party.
Chain of Custody Options
Traceability along supply chains is a main criterion of ISCC. Within ISCC, two chain of custody options exist: physical segregation and mass balance. Additionally, under ISCC PLUS, controlled blending can be used.
Physical Segregation
Sustainable and non-sustainable material are kept physically separate throughout the supply chain. This option is available under both ISCC EU and ISCC PLUS.
Mass Balance
Under the mass balance system, the sustainability characteristics remain assigned to batches of material on a bookkeeping basis, while physical mixing of material with different sustainability characteristics (and mixing of sustainable and non-sustainable material) is allowed. The maximum timeframe for a mass balance calculation is three months, and a mass balance must be site- and scope-specific. The mass balancing approach ensures that volumes of outgoing sustainable material do not exceed volumes of incoming sustainable material.
The sustainable share is the amount of sustainable input multiplied by the conversion factor (CF) of the processing unit. The CF is all outputs divided by all inputs, determined from the operational data of the processing unit (not theoretical data). ISCC PLUS offers free attribution, meaning the sustainable share can be attributed to one or several output materials. A conversion factor greater than 1 is not permitted.
Additives and non-sustainable organic compounds are neglected from the mass balance only if their sum is less than 3% of total mass or energetic value and no single additive exceeds 1%. If an ISCC certified system user receives material under "mass balance," it is not possible to switch to "physical segregation" for the same material afterwards.
Controlled Blending (ISCC PLUS only)
Controlled blending is a planned blending regime resulting in a constant, verifiable content of bio, circular and renewable feedstock in the final product. Only the sustainability characteristic "bio-based content" (raw material categories bio and bio-circular) can be verified via controlled blending, and monitoring can be conducted through C14-isotope analysis.
Credit Transfer
If more sustainable material is received than dispatched within a mass balance period, the surplus is called a "credit." Under ISCC PLUS, positive credit transfer is possible with no time limit, even if no physical material is in stock. Credits are kept strictly site-specific, but under ISCC PLUS they can be transferred between sites of the same company, corporate group or joint venture (for processing units and storage locations) if the output on the certificate annex is the same, all sites are ISCC certified, and (for a JV) the transferring company holds at least 50% in the receiving unit.
GHG Emissions: A Voluntary Add-On Under ISCC PLUS
Under ISCC PLUS, the verification of GHG emissions is voluntary and is added by applying the add-on 205-01 "GHG Emissions." This is a key difference from ISCC EU, where GHG verification is mandatory for all elements of the supply chain. When the add-on is applied, the ISCC EU System Document 205 methodology applies equally.
GHG emission calculation under ISCC PLUS can cover the whole life cycle (cradle-to-grave) or only emissions up to the factory gate (cradle-to-gate); in any case, the GHG add-on must be implemented across the entire supply chain up to the entity claiming a value on the outgoing product. Recognized methodologies for individual calculations include RED II, ISCC, and ISO 14040/44 or ISO 14064/67. The GHG value is stated on the sustainability declaration in kg CO₂eq per ton of product.
What "ISCC Compliant" Means
"ISCC Compliant" means that all economic operators along the supply chain demonstrate that the relevant ISCC standard requirements have been fulfilled. Within ISCC PLUS, the whole upstream supply chain up to the farm/plantation or point of origin must be entirely ISCC certified. Any material used in an "ISCC Compliant" supply chain must consist entirely of ISCC material. The statement "ISCC Compliant" can only be made if the operator has received an equivalent amount of incoming material bearing the same statement on its sustainability declaration.
Every delivery of ISCC certified material must be accompanied by a Sustainability Declaration containing, at minimum: supplier and recipient details, contract and dispatch date, certificate number, a unique declaration number, the statement "ISCC Compliant," product type, quantity in metric tons (or m³ / MWh), raw material category, the chain of custody option applied, and — for circular materials — the waste/residue statement and post-consumer / pre-consumer status.
The ISCC PLUS Certification Process
Step 1: Registration and Scope Definition
Register your company in the ISCC portal and define the sites, scopes (market activities such as collecting, trading, processing) and material categories you want to certify. Choose between ISCC EU, ISCC PLUS, or both under the One-Stop-Shop approach.
Step 2: Select a Certification Body (CB)
Choose an ISCC-recognized certification body. Certification bodies and auditors must meet the requirements of ISCC System Document 103. Contact the CB for a quotation and audit timeline.
Step 3: Gap Analysis and Documentation
Compare your current practices with the ISCC requirements, then prepare documentation: sustainability declarations, mass balance records, self-declarations for farms/plantations, licenses and permits, and (if applicable) GHG calculation data.
Step 4: Audit
Risk-based audits are conducted according to ISCC System Document 204 (Risk Management). Initial audits verify compliance; warehouse sample audits may be conducted remotely under defined low-risk conditions. During the audit, the CB verifies that incoming and outgoing flows of sustainable material are balanced.
Step 5: Corrective Actions and Certificate Issuance
Resolve any non-conformities identified during the audit. Once requirements are met, the certification body issues the ISCC certificate. Certificates are subject to surveillance audits to maintain validity, and ISCC operates an Integrity Program that continuously monitors the performance of system users and certification bodies.
Group Certification and Country Dealers (LRD)
Group certification is available for farms/plantations, points of origin of waste/residue material, and warehouses, and is expanded under ISCC PLUS to country dealers / limited risk distributors (LRDs). An LRD is a separate legal entity acting as a "paper trader" for a corporate group, where the business principal controls a centralized ERP system but does not take physical ownership of the material. To qualify, the certificate holder must hold at least 50% equity share in the LRD, and the LRD must be part of the corporate group's central material-flow documentation system.
The 2026–2027 ISCC PLUS Transition
In 2026, ISCC PLUS is in a transition to its standalone documentation set:
- Harmonized transition documents (e.g. ISCC PLUS V3.3 and the 2025 revisions) remain valid and can be used through 31 December 2026.
- Standalone ISCC PLUS System Documents (v1.1) — covering Governance, Certification Bodies, System Basics, Waste and Residues, Traceability and Chain of Custody, and Risk Management — were published on 13 November 2025 and become mandatory from 1 January 2027.
- The system requirements within ISCC PLUS largely remain unchanged; the main update was removing cross-references to ISCC EU and refining specific traceability and chain-of-custody requirements for clarity.
- Combined ISCC EU + ISCC PLUS audits remain possible, and ISCC PLUS continues to recognize materials certified under ISCC EU.
For companies starting certification in 2026, the practical implication is to align documentation with the standalone v1.1 documents early, while existing certificates and planned audits are unaffected during the transition.
FAQ: ISCC Certification Frequently Asked Questions
The following are frequently asked questions about ISCC certification, optimized to capture "People Also Ask" sections in search results.
Q: What is ISCC certification?
A: ISCC (International Sustainability and Carbon Certification) is a leading global certification system for sustainable, deforestation-free and traceable supply chains of agricultural, forestry, waste and residue raw materials, non-bio renewables and recycled carbon materials. Independent third-party certification verifies ecological and social sustainability requirements, greenhouse gas savings (voluntary under ISCC PLUS) and full supply-chain traceability. It applies across food, feed, chemical, packaging and energy markets.
Q: What is the difference between ISCC EU and ISCC PLUS?
A: ISCC EU demonstrates compliance with the EU Renewable Energy Directive (RED II) legal sustainability requirements, mainly for EU biofuel markets. ISCC PLUS is a voluntary standard for all markets not regulated by RED II — food, feed, energy and industrial applications including chemicals, plastics and packaging. GHG verification is mandatory under ISCC EU but voluntary under ISCC PLUS (via add-on 205-01). Because the schemes are harmonized, a single audit can deliver both certifications.
Q: What materials are eligible for ISCC PLUS certification?
A: ISCC PLUS covers three raw material categories: bio feedstocks (virgin biomass such as corn, sugarcane, rapeseed), circular feedstocks (waste and residues — bio-circular like UCO and food waste, or technical-circular like mixed plastic waste and end-of-life tires), and renewable feedstocks (non-biological materials made using renewable electricity). All agricultural and forestry raw materials, waste, residues, non-bio renewables and recycled carbon materials can be certified.
Q: What is the ISCC mass balance approach?
A: Mass balance keeps sustainability characteristics assigned to material on a bookkeeping basis while allowing physical mixing of sustainable and non-sustainable material. Each mass balance is site- and scope-specific with a maximum timeframe of three months. The sustainable output is the sustainable input multiplied by the processing unit's conversion factor (all outputs divided by all inputs, based on operational data). ISCC PLUS allows free attribution of the sustainable share to one or several output materials, but conversion factors above 1 are not permitted.
Q: Is greenhouse gas (GHG) verification mandatory under ISCC PLUS?
A: No. Under ISCC PLUS, GHG verification is voluntary and is added through the "GHG Emissions" add-on (205-01). This contrasts with ISCC EU, where GHG savings verification is mandatory for all supply-chain elements. When the add-on is applied under ISCC PLUS, the ISCC GHG methodology applies, and the value is reported in kg CO₂eq per ton of product on the sustainability declaration.
Q: What does "ISCC Compliant" mean?
A: "ISCC Compliant" means every economic operator along the supply chain has fulfilled the relevant ISCC requirements, and the entire upstream chain up to the farm/plantation or point of origin is ISCC certified. The statement can only be made when an equivalent amount of incoming material bearing "ISCC Compliant" on its sustainability declaration has been received. Material certified under any voluntary scheme other than ISCC cannot be accepted in ISCC PLUS supply chains.
Q: How long does ISCC certification take and what does it cost?
A: Timelines depend on supply-chain complexity, documentation readiness and certification body scheduling, typically several weeks to a few months from registration to certificate issuance. Costs are set by the certification body you select (covering application, audit and certification) and vary by scope, site count and material categories. ISCC itself does not publish fixed fees, so obtaining quotations from multiple ISCC-recognized certification bodies is recommended.
Q: What changes for ISCC PLUS in 2026 and 2027?
A: From 1 July 2025, ISCC PLUS operates with standalone System Documents (v1.1) independent of ISCC EU, with an 18-month transition. The standalone documents were published on 13 November 2025 and become mandatory on 1 January 2027; the previous harmonized documents remain valid through 31 December 2026. Core requirements are unchanged, combined audits remain possible, and existing certificates are unaffected.
Conclusion
ISCC certification gives producers, traders and brand owners a globally recognized way to prove sustainable, deforestation-free and traceable supply chains — and, under ISCC PLUS, to make credible bio-based, circular and renewable content claims with optional GHG accounting. With the 2026–2027 transition to standalone ISCC PLUS documents, now is the right time to align your system and prepare for audit. Our team supports companies through gap analysis, documentation, audit preparation and ongoing compliance.
Need help getting ISCC certified? Contact our certification experts for a tailored roadmap and audit-ready preparation.
References
- ISCC System GmbH. ISCC PLUS, Version 3.3, Valid from 31 August 2021. https://www.iscc-system.org/
- ISCC System GmbH. ISCC PLUS System – Structure and Overview of ISCC PLUS Documents, Version 1.2, Valid from 13 November 2025. https://www.iscc-system.org/
- ISCC System GmbH. Launch of standalone ISCC PLUS System Documents – public consultation (1 July 2025). https://www.iscc-system.org/news/
- ISCC System Documents (EU/PLUS): 102 Governance, 103 Certification Bodies and Auditors, 201 System Basics, 202 Sustainability Requirements, 203 Traceability and Chain of Custody, 204 Risk Management, 205 Greenhouse Gas Emissions.
TRANWIN MANAGEMENT CONSULTING CO.,LTD.
CONTACT: Mr. David Lee
E-MAIL: chaowang@tranwin.net(prefered)
MOBILE:18601633226
TEL: 0086-21-51029391
WECHAT: LISHUNDAO
ADD: No. 655 Yinxiang Road, Nanxiang Town, Jiading District, Shanghai







